XL 400
Expect Extra Large, More Powerful Performance
The XL 400 is designed for 25-foot Harvestore Structures with 32-inch wide by 10-inch deep trough.
The XL 400 is a silo unloader that is more powerful, faster and more efficient than its predecessors and competition, the Harvestore XL 400 meets the demands of modern farming systems. It was created to be a faster unloading system, comparable to (or even more efficient than) the perceived unloading speed of bags and bunkers.
In field trials, the Harvestore XL 400, with a 30-horsepower 3-phase motor, moved 400 pounds or more of 50% moisture haylage per minute. At that speed, farmers can unload more forage as fast or faster than they can from a storage bag or concrete bunker.
The new innovative direct arm drive system proves fast and uniform feed delivery.
- Features more chain and arm force capacity
- Is available in 1-Phase or 3-Phase models
- Has low, high and four intermediate speeds, which can be changed as the unloader is running
- Offers a Load Sensing System to monitor and react to cutter arm loads
- Has an improved design and almost double the chain strength of previous models
- Features low maintenance
XL 200
Expect Extra Large Performance
The XL 200 is designed for 20-foot and 25-foot Harvestore Structures with 24-inch and 30-inch troughs that are 7.5 inches deep.
Capable of moving more than 200 pounds per minute of 50% moisture haylage, the Harvestore XL 200 has a 25-horsepower variable speed direct drive compared to a 10-horsepower belt drive used in previous unloaders. This additional horsepower gives the XL 200 a cutter chain running force of 4,900 pounds versus only 1,800 pounds for the old Alliance unloader.
Because of its additional power, the XL 200 will always outperform older model unloaders. The XL 200 is smaller than the Harvestore XL 400 unloader, so it fits into all existing Harvestore troughs too small for the XL 400.
- Features more chain and arm force capacity
- Is available in 1-Phase or 3-Phase models
- Has low, high and four intermediate speeds, which can be changed as the unloader is running
- Offers a Load Sensing System to monitor and react to cutter arm loads
- Has an improved chain strength and design
- Features low maintenance
8900H
For High Moisture Grains
The Harvestore® 8900H bottom unloader provides Harvestore owners with a very reliable, low maintenance, high value unloader to accompany Harvestore’s high moisture grain storage units.
Proven in the field, the 8900H unloader’s rugged construction offers long service life. The unit works well for any whole kernel high moisture grain, including corn, milo and barley, or as a low cost replacement unloader for existing units. The 8900H also comes with a one-year manufacturer’s warranty and the service support made available from Cady, Inc.
- Tougher construction means a bottom unloader that is built to work and last
- Superior engineering for increased operating efficiency
- Long lasting and heavy duty
- Lower maintenance
- Crop flexibility for increased usefulness and versatility
|
